Chapter 3 Main System Application
Frame Rate Setup:
Allows you to limit camera’s maximum recording frame rates. If the value
you specify is 10 then it means this camera will not exceeds 10 frames/second. However it
does not guaranteed that it would always record in 10 frames/second, as the actual recording
frame rate will be dependent on the performance of your system. This setting will take effect
in all recording mode including Smart, High and Low.
[Motion Detect]
This area allows you to adjust the build-in motion detector’s sensitivity level from 1 to 10. The
higher the value, the more sensitive the system is to the motion. Movement will be recorded
when the motion exceeds the value. By applying mask to the camera window, system will
ignore movements under “Mask” area. For example, you wish to observe your office but not
the moving traffic outside the street. You may mask the office window containing traffic
movements so that system will ignore the traffic, and record only the areas of the office that
are not masked. Icons used to modify the mask area are as followed:
Apply to all camera
Sensitivity Adjustment
Set mask color
Clear mask
Cut mask
Add mask
Page 33
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Содержание DVR-9404
Страница 1: ......
