MacDon M2170NT Скачать руководство пользователя страница 93

Страница: 93 / 558

262171

Revision A

3.15

Windrower Controls

The controls to operate the windrower are located on the console.

ϭϬϰϭϳϬϰ

Figure 3.54: Console Controls and Autosteer

Console controls:

Turn signals (A)

–

Activates the turn signals on the windrower

and the header.

•

Push-ON/Push-OFF (activating the hazard switch also
cancels the turn signal)

Ground speed lever (GSL) (B)

–

Controls speed and direction of

the movement.

•

F: Forward

•

N: NEUTRAL

•

PARK: Engages neutral interlock, and applies park brake
when steering locked in center.

•

R: Reverse

Hazard warning lights (C)

–

Activates the signals on the

windrower and the header.

•

Push-ON / Push-OFF

Park (D)

–

Engages neutral interlock and applies park brake

when steering locked in center.

Horn (E)

–

Creates noise for signalling purposes.

Autosteer engagement button (F)

–

Engages/disengages the

automated steering system (if installed).

•

ENGAGE: Click to engage

•

DISENGAGE: Turn steering wheel to disengage

OPERATOR

’

S STATION

Содержание M2170NT















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание M2170NT

Отзывы:

MacDon M2170NT, Руководство оператора, Страница: 93 / 558

Результаты поиска

Содержание M2170NT

Отзывы: