MacDon M2170NT Скачать руководство пользователя страница 110

Страница: 110 / 558

262171

Revision A

ϭϬϰϭϵϰϴ

Figure 3.84: HarvestTouch

™

Display

A - Normal Status

B - Cursor Hovered Status

C - Selected Status

Rotating the GSL scroll wheel will highlight function icons (for
example, MENU icon [A])

•

The shade of the icon will change (example [B] inset) to
indicate when the cursor is hovered over it

•

The shade of the icon will change (example [C] inset) when
the icon is selected

Press the GSL SELECT button to activate an option.

3.17.4

Main Menu

The main menu on the HarvestTouch

™

Display provides access to submenus for viewing and adjusting windrower and

header settings.

ϭϬϰϭϵϲϬ

Figure 3.85: HarvestTouch

™

Display Menu

To display the main menu, press MENU icon (A).

The following submenus are accessible through the
main menu:

•

BACK/PREVIOUS arrow (B): returns to the previous page
from any place in the menu

•

HOME icon (C): returns to the HOME page from any
place in the menu

•

INFORMATION (D)

–

submenus include: WINDROWER, HEADER,
MODULE, and PERFORMANCE

•

SETUP (E)

–

submenus include: DISPLAY, WINDROWER, HEADER,
and OTR (one-touch-return)

•

MAINTENANCE (F): provides access to maintenance
reminders.

•

DIAGNOSTICS (G)

–

submenus include: WINDROWER CODES, ENGINE
CODES, INPUT/OUTPUT, CAN NETWORK

•

EMISSIONS (H): provides access to aftertreatment
FORCE and INHIBIT modes and displays fuel and harvest
rate information.

OPERATOR

’

S STATION

Содержание M2170NT















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание M2170NT

Отзывы:

MacDon M2170NT, Руководство оператора, Страница: 110 / 558

Результаты поиска

Содержание M2170NT

Отзывы: