MacDon M2170NT, Руководство оператора, Страница: 344 / 558

262171
324
Revision A
Table 6.6 Tire Pressure Specifications
–
M2 Series Windrowers Paired with Auger Headers
Header Type Description Drive Wheel Tire Type Pressure kPa (psi)
A40DX
4.9 m (16 ft.)
Bar or Turf
200 (29)
A40DX GSS
4.9 m (16 ft.)
(Grass Seed)
Bar or Turf
159 (23)
A40DX
5.5 m (18 ft.)
Bar
200 (29)
A40DX
5.5 m (18 ft.)
Turf
220 (32)
6.7.5 Checking Engine Coolant
Coolant is cycled through the engine to help reduce internal heat. The coolant must be at the appropriate level for the
cooling system to work correctly. Check the coolant level in the pressurized coolant tank daily.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
NOTE:
Ensure the engine has cooled down prior to checking.
1. Shut down the engine, and remove the key from the ignition.
2. Open the hood. For instructions, refer to 6.3.1 Opening Hood, page 287 .
1036899
A
B
Figure 6.56: Coolant Recovery Tank
3. Locate coolant recovery tank (A).
4. Visually inspect the coolant level. Ensure that the coolant
level is at MAX COLD line (B). If the coolant level is too low,
add more coolant. For instructions, refer to
Adding Coolant
after System Drain, page 368 . For fluid quantities, refer to
6.1.2 Lubricants, Fluids, and System Capacities, page 279 .
For coolant specifications, refer to 6.1.4 Coolant
Specifications, page 281 .
5. Close the hood. For instructions, refer to 6.3.2 Closing Hood, page 288 .
MAINTENANCE AND SERVICING