MacDon M2170NT Скачать руководство пользователя страница 332

Страница: 332 / 558

262171

312

Revision A

1015198

Figure 6.44: M2170NT Return Filter

Locate return filter (A) under the left platform.

Clean around the head of filter (A).

Place a container beneath filter (A) to collect any oil that
leaks out.

Unscrew filter (A) with a filter wrench.

Dispose of the used oil and filter in a manner that complies
with local rules and regulations.

1015828

Figure 6.45: Return Filter

NOTE:

The image shows the filter head removed for
component clarity.

Remove and discard gasket (C) from groove (B) in filter
head (A).

NOTE:

Filter (D) is shown to provide context.

Installing Return Oil Filter

The return oil filter removes particulate contaminants from the oil returning from the fan drive, lift circuits, and drive
circuits.

NOTE:

For filter specifications, refer to

6.1.5 Filter Part Numbers, page 281

NOTE:

The image shows the filter head removed for component clarity.

MAINTENANCE AND SERVICING

Содержание M2170NT















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание M2170NT

Отзывы:

MacDon M2170NT, Руководство оператора, Страница: 332 / 558

Результаты поиска

Содержание M2170NT

Отзывы: