MacDon M2170NT, Руководство оператора, Страница: 231 / 558

262171
211
Revision A
1012856
A
B
C
D
Figure 5.42: Light Switches
8. Press switch (A) to activate the road lights.
NOTE:
Always use these lights when driving windrower on roads.
9. Press switch (B) for high/low beams when other vehicles
are approaching.
IMPORTANT:
Do NOT use the field lights on the road; other drivers may
be confused by them.
10. Press switch (C) to activate the beacons.
11. Press switch (D) to activate the hazard lights.
ϭϬϰϭϲϯϳ
B
A
Figure 5.43: Console
12. Set the desired maximum ground speed limit. For
instructions, refer to Adjusting Ground Speed Limit, page
203 .
NOTE:
Maximum ground speed can be set while the windrower is
moving. Anticipate the acceleration or deceleration if
changing the maximum speed.
13. Slowly push throttle (A) to full forward (operating speed).
14. Move ground speed lever (GSL) (B) out of PARK and slowly
forward to the desired speed.
1020166
Figure 5.44: Towing a Header
15. If towing a header, refer to Towing Header with Windrower,
page 218 .
OPERATION