PRE-DELIVERY CHECKS
Form 169018
50
Revision C
X. INTERIOR
LIGHTS
a. Switch lights on and off with switches on each
light. Interior lights only work with ROAD or FIELD
light switch on.
XI. A/C AND HEATER
IMPORTANT
To distribute the oil throughout the
system, perform the following steps
whenever the machine is first started
after storage for more than one week.
a. With the engine running, turn blower switch to the
first position, turn temperature control switch to
maximum heating, and A/C control to “OFF”.
b. Click A/C switch from "OFF" to "ON" for one
second, then back to "OFF" for 5 to 10 seconds.
Repeat this step ten times.
K. MANUALS
a. The following manuals should be stored in the
manual storage case behind the operator’s seat:
•
M Series Self-Propelled Windrower
PARTS CATALOG. Form #169016.
•
M Series Self-Propelled Windrower
OPERATOR’S MANUAL. See below:
WINDROWER FORM
NO.
MacDon 169017
Premier 169095
Westward 169087
•
Engine
Manual
L. CAB INTERIOR
a. Remove plastic coverings from Cab Display
Module and seats, after pre-delivery check is
complete.
OUTSIDE AIR SWITCH
Controls Air Source
FRESH AIR - Starts Booster Fan and
Filtered Outside Air Drawn Into Cab
RECIRCULATE - Stops Booster Fan
and Cab Air Is Recirculated
AIR CONDITIONING SWITCH
Controls A/C System
OFF - A/C Does Not Operate.
ON - A/C Operates With Blower
Switch On.
TEMPERATURE CONTROL
Controls Cab Temperature
INCREASE - Clockwise
DECREASE - Counter Clockwise
BLOWER SWITCH
Controls Blower Speed
OFF / LO / MED / HI