UNLOADING AND ASSEMBLY
Form 169018
17
Revision C
D
E
h. Attach two additional wires in the wiring harness to
the radio:
1. Circuit 503 - Red with 1/4 in. female blade
terminal. This is a live wire provided for
powering a radio clock/memory, if these exist
on your radio.
2. Circuit 315 - Black ground wire attaches to
radio body.
i.
Plug cable from antenna into radio.
NOTE
An approved radio package is available
from Radio Engineering Industries (REI)
of Omaha, Nebraska.
j.
Attach stud (supplied with radio) to center rear of
radio.
k. Attach support (D)
to stud on back of
radio chassis with
lock washer and
metric nut (E) that
was supplied with
the support.
Support can be
attached to chassis
in multiple locations
to allow for proper
mounting of radio.
l.
Reinstall radio panel with original screws.
m. Adjust bracket (J) if necessary by loosening nuts
(K) to allow radio to slide into opening, and
securely capture support (D).
n. Turn battery disconnect switch to ON position.
o. Turn ignition key to ACC, switch on the radio, and
check operation in accordance with instructions
supplied with the radio.
STEP 9. INSTALL SLOW MOVING
VEHICLE (SMV) SIGN
Install SMV sign in accordance with instructions
supplied with the kit.
J
D
K