214735
42
Revision A
3.13
Connecting Batteries
1019838
A
B
Figure 3.51: Engine Compartment Hood
1.
Move latch (A) towards right cab-forward side of the
windrower.
2.
Grasp louver (B), and lift the hood to open.
1018879
A
B
Figure 3.52: Battery Location
3.
Lift up on the cab-end of the cover (A) to disengage it
from the retaining tab (B), and swing cover away from
the frame.
IMPORTANT:
Batteries are negative grounded.
Always connect
starter cable to the positive (+) terminal of battery and
battery ground cable to negative (
–
) terminal of battery.
Reversed polarity in battery or alternator may result in
permanent damage to electrical system.
NOTE:
Before connecting the harness to the batteries, ensure
that positive terminal is positioned on the right side of
the battery when installed on the battery support.
1012747
B
A
Figure 3.53: Batteries
4.
Attach red positive (+) cable terminals to positive
posts (B) on batteries and tighten clamps. Reposition
plastic covers onto clamps.
5.
Attach black negative (
–
) cable terminals to negative
posts (A) on batteries and tighten clamps. Reposition
plastic covers onto clamps.
