214735
60
Revision A
4.2
Performing Operational Checks
1.
Perform the final checks and adjustments listed on the following pages and the
Predelivery Checklist, page 129
(yellow sheet attached to this instruction) to ensure the machine is field-ready.
2.
Ensure the Operator or the Dealer retains the completed Predelivery Checklist.
4.2.1
Checking Auto Lights
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator
’
s seat for any reason.
1016225
Figure 4.25: HPT Display
–
Boot-Up
1.
Open the cab door, turn the IGNITION switch to ON and
confirm that the Harvest Performance Tracker (HPT)
display is booting up by displaying MACDON.
1016226
Figure 4.26: HPT Display
–
Header Disengaged
2.
Start the engine. Refer to
3.
If a header is attached, confirm that the HPT default
shows the header disengaged screen.
