WINDROWER OPERATION
Form 169552 / 169554 / 169555
70
Revision A
6.3.8.2.2 From Transport Mode To Field
Operation
DANGER
Stop engine, and remove key from ignition
before leaving Operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Shut down windrower, and remove key.
b. Disconnect windrower harness (A) from towing
harness receptacle (B) in LH float spring tower.
c. Disconnect electrical harness (C) from
windrower, and store harness on tow-bar.
d. Undo lock (D), remove safety chain (E) from
drawbar, and remove clevis pin (F).
e. Move tow-bar off drawbar.
f. At rear of windrower, remove pins (G), lift
drawbar support (H) to “horizontal position”, and
re-install pins as shown.
g. Alternate drawbar (J) is used for attaching a
tow- behind swath roller.
IMPORTANT
Do not use alternate drawbar for any other
purpose.
h. Disassemble tow-bar, and store on header. See
Header Operator’s Manual.
(continued next page)
C
A
B
G
H
H
G
J
E
F
D