MacDon M Series, Инструкции по разгрузке и сборке

Страница: 58 / 396

ASSEMBLING THE WINDROWER
2. Position hose (MD #111323 [orange tie]) (D) and
hose (MD #111324 [white tie]) (E) with tee under the
center of the clip as shown, and loosely install two
bolts and nuts.
NOTE:
Part numbers are marked on the hoses.
3. Position remaining hoses under clip as shown and
tighten bolts.
Figure 3.37: Hose Routing (View Looking
Forward)
A - Hose Clip B - Yellow Tie (MD #111557)
C - Blue Tie (MD #111323) D - Orange Tie (MD #111323)
E - White Tie (MD #111324) F - Green Tie (MD #111327)
G - White Tie (MD #111328)
4. Locate two hoses (MD #111327 [green ties]) (A) in
frame opening and existing tee fitting (green tie) on the
hose from the valve block.
5. Remove caps from the hoses (A) only.
6. Remove one cap from tee fitting, and quickly attach
hose (A) to minimize oil spillage.
7. Remove second cap from tee fitting, and quickly
connect other hose (A).
8. Tighten fittings.
9. Position hoses into frame.
Figure 3.38: Hose Routing
10. Locate two hoses (white ties) inside frame and
hose (MD #111324) with existing tee fitting
(white tie) (A).
11. Remove caps, make connections, and tighten fittings.
12. Position hoses into frame.
Figure 3.39: Hose Routing
147962
44
Revision A