MacDon D60, Руководство оператора, Страница: 16 / 35

16
15 Mount a universal joint assembly,
Part 7, into the inside facing end of
the Right-Hand Side Auger Barrel,
Part 6. Align the grease nipple with
the access hole in the shroud.
For longevity of the adjustable
fitment, coat the spline with an anti-
seize product prior to inserting.
16 Remove the right-hand side
bracketry, Part 2A, from the mount.
Insert the shaft of the Right-Hand
Side Auger Assembly, Parts 6 and 7,
from
Steps 12 and 13 , into the
bearing housing of the Right-hand
Side bracketry, Part 2A.
Once fitted, fasten the bracket to the
fixed mount once again.
Insert the opposite end of the
assembly, the Universal Joint Keyed
Clamp Collar, Part 7, onto the Right-
Hand Side of the auger barrel key and
shaft, Part 5.
Ensure to align the auger barrels for
continuous flighting across the
sections.
17 Starting with the fore/aft actuators
fully retract to ensure auger sections
are relatively in-line.
Ensure 3mm gap from yoke clamp to
bearing.
Centralise all three Auger Barrels
relative to the bracketry.