MacDon D60, Руководство оператора

Страница: 11 / 35

11
3 Prepare immediate surfaces of the
header front in the proposed fixture
locations, by grinding away surface
finish and rust until the bare metal
surface is visible.
4 Prepare the bracketry of the
FeedStorm kit, Parts 8 and 9, by
grinding off any protective coatings
on the underside of the brackets, and
10mm around the edges, where
foreseeably welding.
Isolate the header battery if the
header front is currently attached to
the header.
5 Tack weld the base plates of Parts 8
& 9 to the header front as a short-
term fixture. Ensure to do so without
disassembling the base plates from
the assemblies.
Tack weld enough to support the self-
weight of the assembled FeedStorm;
approximately 50kg per auger barrel
section.