MacDon D60, Руководство оператора

Страница: 12 / 35

12
6 IF the end plate bracket mounts,
Parts 1B and 2B are not preexisting in
the marked locations on the header
front, align the supplied brackets as
depicted in drawing UCA-MCD-ASM.
7 IF REQUIRED: Tack weld Parts 1B and
2B mounting brackets to the header
front as a short-term fixture. Enough
to support the self-weight of the
assembled FeedStorm; approximately
50kg per auger barrel section.
8 Ensure the entire subassembly of
Parts 1, 2, 8 and 9, are in their correct
position and aligned relative to each
other on the header front.
Insert the 4 actuators, 11A, as shown
to the bracketry, 8 and 9.
Ensure the actuators labelled
“ LH/RH
Fore & Aft ” , are inserted correctly.
If a 40ft header front use the short
braces, 1C and 2C.
If a 45ft header front use the longer
braces, 1D and 2D. The longer brace
fastens to two preexisting tapped
holes on the header front.