MacDon D60, Руководство оператора

Страница: 17 / 35

17
18 Once positioned appropriately,
tighten the clamp of both Universal
Joints, Part 7.
Fasten the two grub screws of the
Mount bracket Assemblies, Parts 1A
and 2A, to the shaft of the Left- and
Right-Hand Side Auger Barrel shafts,
Part 3 and 6.
Fasten the two grub screws on the
hydraulic motor shaft housing, Part 4,
to the shaft.
Fasten the shaft of the Center Auger
Barrel, Part 5, to the bearings of Parts
8 and 9, using the locking collars and
grub screws. Firmly position the
locking collar against the bearing
prior to tightening the grub screws.