MacDon D60, Руководство оператора

Страница: 15 / 35

15
13 Insert Part 5, the Auger Barrel
Assembly Center piece, into the arms
and bearing units of Parts 8 and 9.
Lift into location and fasten to the
‘fore and aft’ actuato rs.
Ensure the auger flighting is the
correct orientation, to feed inwards
and downwards from the front
orientation, towards the center
barrel of the header front when in
operation.
14 Remove the left-hand side bracketry
from the mount, comprising of the
hydraulic motor.
Insert the key and shaft of the Left-
Hand Side Auger Assembly, Parts 3
and 7, from
Steps 8 and 9 , into the
keyed housing of the hydraulic
Motor, Part 4.
Once fitted, fasten the bracket to the
fixed mount once again.
Insert the opposite end of the
assembly, the Universal Joint Keyed
Clamp Collar, Part 7 onto the key and
shaft of Part 5.
Ensure to align the auger barrels for
continuous flighting across the
sections.