169441
57
Revision D
NOTE:
The reel components are not shown in the illustrations in this procedure for the sake of clarity.
1.
Position reel fully aft with support arms horizontal.
2.
Shut down the engine, and remove the key from the ignition.
Repositioning the right reel arm cylinder
ϭϬϰϬϭϮϮ
A
B
C
D
E
Figure 3.40: Right Reel Arm Cylinder in Forward
Position
3.
Remove bolt and nut (A) and four bolts (B) securing hose
shield (C).
NOTE:
Only two of bolt (B) are visible in the illustration. The other
two are on the other side of the hose shield.
4.
Move hose shield (C) and the hoses away from the reel arm
cylinder.
5.
Remove bolts (D) that secure aft plate (E), and then remove
the aft plate.
ϭϬϰϬϭϮϭ
A
B
Figure 3.41: Right Reel Arm Cylinder
6.
Remove bolts (A) so that front support (B) is free to
move up.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......