169441
87
Revision D
ϭϬϯϵϴϳϳ
A
B
C
Figure 3.84: Existing Deflector
5.
Mark a straight line (A) on the deflector 100 mm (4 in.)
from and parallel to the back edge of the deflector.
6.
Mark another line (B) on the deflector 100 mm (4 in.) from
and parallel to the endsheet.
7.
Using a sharp knife, cut the rubber deflector along lines (A)
and (B), taking care not to cut the draper underneath the
deflector.
8.
Cut the rubber deflector along steel retainer (C) from the
inboard edge up to line (B), and remove the excess rubber.
ϭϬϯϵϴϳϲ
Figure 3.85: Deflector After Trimming
9.
Use the cut-off portion of the deflector as a template to
rework the deflector on the opposite end of the header.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......