169441
198
Revision D
ϭϬϯϵϴϯϲ
A
Figure 4.156: Fore-Aft Position
4.
Adjust the fore-aft reel position so that the back end of the
cam disc is between the 4 and 5 on fore-aft position
indication decal (A).
5.
Lower the reel fully.
6.
Shut down the engine, and remove the key from
the ignition.
1001595
A
Figure 4.157: Single-Reel Header
7.
Measure the clearance at the ends of each reel at
locations (A).
NOTE:
The reel is factory-set to provide more clearance at the
center of the reel than at the ends to compensate for reel
flexing.
1001596
A
Figure 4.158: Double-Reel Header
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......