169441
176
Revision D
1009514
C
D
E
A
B
L
Figure 4.114: Knife Drive Box
18. Remove bolt (A) that clamps knife drive arm (B) to the knife
drive box output shaft.
19. Remove knife drive arm (B) from the knife drive box
output shaft.
20. Remove four knife drive box mounting bolts (C) and (D).
NOTE:
Bolt (E) is factory set; do
NOT
remove it. It is used to secure
the knife drive box in the proper fore-aft position.
CAUTION
The knife drive box and pulley weigh over 35 kg (65 lb.) Use
care when removing or installing it. Lug (L) can be used for
lifting.
21. Remove the knife drive box and place it on a bench for
disassembly.
Removing Knife Drive Box Pulley
To remove the knife drive box pulley, follow the recommended removal procedure provided here.
1002446
A
B
C
Figure 4.115: Knife Drive Box and Pulley
1.
Loosen and remove knife drive box pulley clamping bolt (A)
and nut (B).
2.
Remove knife drive box pulley (C) using a three-jaw puller.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......