Mac allister MBC3630 Скачать руководство пользователя страница 6

Страница: 6 / 48

MBC3630

by MacAllister

Getting

started...

Power tool use and care

Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will

do the job better and safer at the rate for which it was

designed.

Do not use the power tool if the switch does not turn

it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool.

Power

tools are dangerous in the hands of untrained users.

Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use.

Many accidents are caused

by poorly maintained power tools.

Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed.

Use of the power tool for operations

different from those intended could result in a hazardous

situation.

Safety warnings

Safety information

Содержание MBC3630

















































Результаты поиска

Содержание MBC3630

Отзывы:

Похожие инструкции для MBC3630

Бренды по названию

Популярные бренды

Mac allister MBC3630, Оригинальное руководство пользователя

Результаты поиска

Содержание MBC3630

Отзывы:

Похожие инструкции для MBC3630

Бренды по названию

Популярные бренды