Mac allister MBC3630, Оригинальное руководство пользователя

Страница: 31 / 48

EN
31
In
more
detail...
MBC3630 by MacAllister
Product functions
6. Ensure the position of the product is properly balanced.
7. Ensure that the angle of the cutting head is parallel to the surface being cut
(Fig. 17).
3. Adjust the length of the harness (22) so that the securing clip (22a) is
approximately 15 cm below your waist.
4. Attach the securing clip (22a) to the loop the suspension sleeve (12) (Fig. 15).
5. Lock the harness on the suspension sleeve (12). Make sure the protection
pad (22b) runs under the upper pole (9) (Fig. 16).
9
12
22a
Fig. 15
22b 22a
12
9
Fig. 16
Fig. 17
22c
22
Fig. 18
9
12
22a
Fig. 15
22b 22a
12
9
Fig. 16
Fig. 17
22c
22
Fig. 18
WARNING! Always attach the product to the harness (22). Do not
carry it only with your hands!
8. In case of emergency hold the upper pole (9) with the right hand, and use the
left hand to push open the release lever (22c). The harness (22) will be released
automatically from the body because of the weight of the product (Fig. 18).
9
12
22a
Fig. 15
22b 22a
12
9
Fig. 16
Fig. 17
22c
22
Fig. 18