Mac allister MBC3630, Оригинальное руководство пользователя

Страница: 24 / 48

EN
24
MBC3630 by MacAllister
Getting
started...
Before you start
Setup
WARNING! Never use the trimmer head (18) or cutter blade (21)
without the guard (17) properly fitted.
NOTE: Always remove knife protector (17e) before use.
Handle bars
Adjust the handle bars (3, 13) to the suitable position to fit the intended use (Fig. 4, 5)
17
17a
17b
17f
17c
16
17g
17a
17c
17f
17b
17g
17
17
23
23
1.
3.
4.
2.
Fig. 3
3
13
Fig. 4 (Storage position)
13
3
Fig. 5 (Working position)
1. Unfold the clamp lever (5) but don’t remove it, then rotate two handle bars (3,
13) 90º from the storage positions to the working position (Fig. 6, step 1).
2. Pass the slot of the handle bars (3, 13) through the bolts (14a) of handle
support (14) all the way until you hear a click and keep the handle bars (3, 13)
in place (Fig. 6, step 2). Secure the connections by tightening the bolts (14a)
clockwise using the supplied hex key (4mm) (25).
3. Lock the handle bars (3, 13) by folding up the clamp lever (5). If clamp lever
(5) cannot be folded, loosen it and fold again. If it is too loose, tighten it by
swinging the clamp lever (5) in clockwise (Fig. 6, step 3).
4. Make sure the electric cord (10) run on the right-handle bar (3).