Mac allister MBC3630 Скачать руководство пользователя

Страница: 12 / 48

MBC3630

by MacAllister

Getting

started...

blade.

A damaged supply cord may result in electric shock,

fire and/or serious injury.

17.

Keep all parts of the body away from the cutter, line

or blade when the machine is operating. Before you

start the machine, make sure the cutter, line or blade

is not contacting anything.

A moment of inattention

while operating the machine may result in injury to

yourself or others.

18.

Do not operate the machine above waist height.

This helps prevent unintended cutter or blade contact

and enables better control of the machine in unexpected

situations.

19.

When cutting brush or saplings that are under tension,

be alert for spring back.

When the tension in the wood

fibres is released, the brush or sapling may strike the

operator and/or throw the machine out of control.

20.

Use extreme caution when cutting brush and saplings.

The slender material may catch the blade and be whipped

toward you or pull you off balance.

21.

Maintain control of the machine and do not touch

cutters, lines or blades and other hazardous moving

parts while they are still in motion.

This reduces the risk

of injury from moving parts.

22.

When clearing jammed material or servicing the

machine, make sure all power switches are off and the

power cord is disconnected.

Unexpected starting of the

machine while clearing jammed material or servicing may

result in serious personal injury.

23.

Carry the machine with the machine switched off Mand

away from your body.

Proper handling of the machine will

reduce the likelihood of accidental contact with a moving

cutter, line or blade

24.

When transporting or storing the machine, always fit the

Safety information

Safety warnings

Содержание MBC3630

















































Результаты поиска

Содержание MBC3630

Отзывы:

Похожие инструкции для MBC3630

Бренды по названию

Популярные бренды

Mac allister MBC3630, Оригинальное руководство пользователя

Результаты поиска

Содержание MBC3630

Отзывы:

Похожие инструкции для MBC3630

Бренды по названию

Популярные бренды