Figure 5
8
Figure 6
Figure 4
5. Tighten cone screws while adjusting the
4. Lossen the two cone screws on the fence
And tighten it.
tighten the nut on cone screws(C Fig. 6).
the fence is secured and also preperly flexibe,
flexibility of the fence by tilting th fence. When
nuts on the fence (B Fig. 6).
carriage (A Fig. 6), line up with the two cone
3. Connect these two parts with the cap screw.
fence holder.(Fig. 5)
2. Line up the hole on the fence and thread on
on the fence holder.(Fig. 5)
with the two cap screws. (Fig. 4)
1. Lossen and take off the cap screw attached
4. Attach the fence carriage to jointer, make sure
Installing Fence Carriage to Jointer
Installing Fence to Fence Carriage
surface, tighten the cap screws.
the surface of carriage level with jointer table
3. Line up two open holes on the fence carriage
carriage.
2. Use an man assistant to hold the fence
the back of the jointer. Note-DO NOT
completely remove the cap screws.
1. Lossen the two cap screws attached on
