To Set the 45° Outward Fence Stop
13
Figure 20
3. Tighten lock screws and lock nuts
As shown in Fig. 20
1. Loosen two lock nuts and gib lock screws.
Figure 19
until it makes contact with the back of the fence.
as shown in Fig. 19
as shown in Fig. 18
2. Adjust the 45 outward fence stop set screw
Figure 18
the fence to the 135 (45 inward) position.
1. Using a sliding bevel adjusted to 135 , adjust
Note
: Whenever making an adjustment to the
fence, lift the fence up slightly after releasing the
lock handle to avoid scratching the table.
°
°
°
°
Gib Adjustment
After a period of use, the gibs may become
loose and need adjusting:
2. Tighten each set screw 1/4 turn starting at
the bottom and working up. If a 1/4 turn
does not remove all play, take another 1/4
turn. Repeat a 1/4 turn at a time for all three
set screws until play is removed.
