M2 Antenna Systems RC2800PRKX2SU, Руководство пользователя

Страница: 21 / 24

ERROR CODES:
E1 = No Motion. The controller has not sensed a movement of at least “1” degree within the Motor Timeout Value
(which is defaulted to “4” seconds)
E2 = Range Error. This means that the controller is too close to the most CCW / DWN heading allowed by the
software. This is more than “45” degrees CCW / DWN from zero ( - 90) when the pulse divider is at it ’ s max of
50,000. We allow >90 degrees with the pulse divider that you are using now.
E3 = Backup No Motion. The “ PO ” or “ P1 ” has been running for ~ 8 seconds with no movement from the heading
indicator.
E5 = Reserved
E6 = Illegal CPU Chip. The software can only run if it ’ s installed in a chip that was programmed with a boot loader
from M2 Facility.
TROUBLE SHOOTING / ERROR CODES