M2 Antenna Systems RC2800PRKX2SU, Руководство пользователя

Страница: 1 / 24

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432 - 8873 Fax: (559) 432 - 3059 Web: www.m2inc.com
©2016 M2 Antenna Systems Incorporated
04/27/12
Rev.01
M2 Antenna Systems, Inc.
Model No: RC2800PRKX2SU
A
d
va
n
ced
Op
er
ati
o
n
s
C
o
n
tr
o
lle
r Ov
er
vie
w
C
o
n
n
ecti
o
n
s
/ S
ta
rt
U
P
Tr
o
u
b
le
Sh
o
o
ti
n
g
SPECIFICATIONS
MODEL NUMBER .................................................... RC2800PRKX2SUMC
POWER REQUIREMENTS. ..................................... 115 / 230 VAC @ 6.7A / 5.0
ENCLOSURE SIZE .................................................. W=19 ” / H=5.25 ” / D=10 ”
COLOR ..................................................................... Clear Anodized / Black & Rear Black Anodized
POINTING ACCURACY ........................................... <0.3°
READOUT ACCURACY .......................................... <0.1°
MINIMUM COMMANDED MOTION ........................ >0.25°
DIGIT SIZE ............................................................... 0.5” Heading / .375” Mode / Speed
CONTROL SWITCHES ............................................. Tactile 0.5” Diameter
MICROPROCESSOR TYPE ..................................... “ Microchip ” PIC18F2520 - I/SP
CONTROLS .............................................................. Power Switch, ON / OFF
Speed Buttons, Increments 1 - 9
Clockwise & Counterclockwise Buttons
Up & Down Mode Buttons
MODES ..................................................................... (3) Operational Run Modes / (10) Presets
STANDARD OUTPUT VOLTAGE ............................ AZ / EL = 48 VDC 6.7 AMP
COMPUTER INTERFACE ........................................ RS232 (X2) or USB (X2)
FEATURES
The M2 RC2800PRKX2SUMC is our Mid Grade rack - mount controller. The RC2800PRKX2SUMC was developed for “ Commercial
Grade ” AZ/EL Pedestal Models (AE1000, AE1000CB and AE1000CBW) *Also available for a (3) Axis System .
The M2 RC2800PRKX2SUMC uses a Microchip PIC18F2520 - I/SP for Micro processing user commands, M2 software and EEprom
for memory. User modes include: (3) Operational / Run Modes and (10) programmable presets.
The M2 RC2800PRKX2SUMC uses a Meanwell switching power supply so 115VAC or 230VAC can be used for the main power
input with no switching needed.
The M2 RC2800PRKX2SUMC uses PWM (Pulse Width Modulation) for speed control, allowing for full torque at the slowest input
speed. Location heading from the motor assembly is supplied via an Open Loop Circuit to the controllers ’ microprocessor.
The M2 RC2800PRKX2SUMC software was developed for a commercial customer. A full GUI software for setup and run modes
and a Interface Control Document (ICD) is supplied with the RC2800PRKX2SUMC.
Computer interface to the RC2800PRKX2SU is via (2) individual RS232 ports or as an option (2) USB ports.