237
47DT OPERATING MANUAL EM-9508-B Rev.7
■
LOCKOUT ‘LV1’ (PARTIALLY UNLOCK ADVANCED SETTING MODE)
NOTE
• With the event trigger mode set to “normal”, the ON timing delay and OFF timing delay are disabled.
• With the event trigger mode set to “sampling hold”, the OFF timing delay is disabled.
• With the low-end cutout set to OFF, the low-end cutout value setting is locked.
for ≥ 3 sec.
+
for ≥ 1 sec.
Measurement
started
Measurement
stopped
Measuring Mode
or
Event trigger mode
NORMAL (normal)
S-HLD (sampling hold)
P-HLD (peak hold)
B-HLD (valley (bottom)
hold)
PP-HLD (peak-to-peak
hold)
ON timing delay
0.0 – 999.9 sec.
Startup timer
0.0 – 99.9 sec.
OFF timing delay
0.0 – 999.9 sec.
Averaging type
MOVING (moving average)
SIMPLE (simple average)
OFF, 2, 4, 8, 16, 32, 64,
128, 256, 512
Averaging time
OFF (low-end cutout OFF)
ON (low-end cutout ON)
ABS (absolute value
low-end cutout ON)
Low-end cutout
Selectable only with the I/O option code ‘6’ or ‘A’ (event trigger input).
*
Advanced Setting Mode
Display color
GRN-R (green (normal) to
red (alarm))
GRN (green)
RED-G (red (normal) to
green (alarm))
RED (red)
00 (automatic return disabled)
1 – 99 sec.
Automatic return time to
Measuring Mode
0 – 99 sec.
Transition time to Lockout
Setting Mode
0.0 – 99.9 sec.
Display refreshing rate
Indicating firmware version
Version indication
Low-end cutout value
0.0 – 9.9
H (Upscale burnout)
L (Downscale burnout)
Burnout
OFF (CJC sensor
disabled)
ON (CJC sensor
enabled)
CJC sensor
