M Solutions MS-TestPro MS103TDs, Руководство пользователя

Страница: 11 / 113

MS-TestPro User’s Manual
Page 11 of 113
2.2 Models
The MS-TestPro HDBaseT Test Device is supplied in a variety of models and add-on modules:
Table 1: MS-TestPro Models
Model Description
MS103TDs HDBaseT tester main unit with 3.5" touch display, built-in HDMI pattern
generator, and Wi-Fi connection for smart devices
MS104B
Battery based HDBaseT tester main unit with 3.5" touch display, built-in
HDMI pattern generator, and Wi-Fi connection for smart devices
Table 2: MS-TestPro Modules
Model Description
Standard Modules
HDBaseT Spec 1.0
Transmitter and Receiver
Modules The MS-TestPro HDBaseT Test Device is supplied with HDBaseT Spec 1.0-
standard Tx and Rx modules.
Optional Add-On Modules
HDBaseT Spec 2.0
Transmitter and Receiver
Modules The HDBaseT Spec 2.0 Modules (Tx and Rx units) are available as an
optional add-on that can be used with any of the test devices listed in
Table 1 above.
DCR Module The DC Resistance feature enables installers and integrators to easily
and reliably check DC resistance unbalance
– both within and between
twisted pairs – ensuring system integrity in even the most advanced,
high-powered Power-over-HDBaseT systems.
HCT Module The HDMI Cable Tester module allows installers and integrators to test
the quality of HDMI cables before their installation. The module
identifies missing and shorted wires in HDMI cable that will render the
cable incapable of 4K streaming.
Looper Module
The Looper module is a remote-end module with RJ45 and HDMI ports
that is used to create the loop at the other end for DC Resistance and
HDMI cable testing.