MS-TestPro
User’s Manual
Page 48 of 113
NOTE
In this description, the Compatibility and Sweep tests are presented separately. You can check
both
the
Compatibility
and
Sweep
boxes to run the two tests simultaneously.
4.
The MS-TestPro begins testing
the cable’s compatibility with the HDMI
bandwidth. When
the test is complete, a summary screen appears. In the example shown below, the cable
failed the 4K/60Hz test. A list of shorted wires
–
wires that were interconnected within the
cable, thus neutralizing their functionality
–
appears as well. If needed, tap
Run
to perform
another compatibility test.
Figure 58: Compatibility Test Results
5.
If the message “Cable not found” appears on the screen, check the physical connection of
the cable to the modules, and tap
Run
again.
Figure 59: "Cable not found" Message
Содержание MS-TestPro MS103TDs
