LXNAV LX90xx Скачать руководство пользователя

Страница: 80 / 151

LX90xx system Version 4.0

February 2014

Page 80 of 151

•

Change Wind Methods

, user will not be able to change methods for wind

calculation.

•

Change Page Style

, it is not possible to change page layout

•

Change Flarm Target

, user can not change flarm targets names and other data for

it.

•

Use Flight Recorder menu

, user can not modify flight recorder properties.

•

Use Display menu

, user can not modify display properties.

•

Use Files and Transfer menu

, it is not possbile to use files and transfer menu

completely.

•

Select Airspace file

, user can not select and modify airspaces at all.

•

Modify Airspace

, user can select different airspace file, but he can not edit or

delete it.

•

Select Airport file

, user can not select and modify airports.

•

Select Waypoints file

, user can not select and modify waypoints files.

•

Modify Waypoints

, user can select, but can not delete waypoints file.

•

Select Raster maps

, user can not select and modify scanned maps.

•

Modify Raster maps

, user can select, but not modify scanned maps.

•

Format SD Card

, user can not format SD card.

•

Update Databases

, user can not update databses.

•

Modify PDFs

, user can not delete stored PDF documents.

•

Delete Flight

, user can not delete stored flight.

•

Use Graphics menu

, can not use this menu.

•

Use Sounds menu

, can not use this menu.

•

Use Observation Zones menu

, can not use this menu.

•

Use Optimization menu

, can not use this menu.

•

Use Warnings menu

, can not use this menu.

•

Use Units menu

, can not use this menu.

•

Use Hardware menu

, can not use this menu completely.

•

Use rear/front seat menu

, user can not use this menu.

•

Use NMEA output menu

, user can not use this menu.

•

Use Polar menu

, user can not modify any glider parameters

•

Use Profiles menu

, user can not modify Profiles at all. He can change profile only

by restarting the device.

•

Modify Profiles

, user can not delete, edit or lock profile.

•

Use Language menu

, user can not use this menu.

•

Use Passwords menu

, user can not use this menu.

Once actions are selected and admin mode is closed, user will un-selected items grayout.

Содержание LX90xx
























































































































































Результаты поиска

Содержание LX90xx

Отзывы:

Похожие инструкции для LX90xx

Бренды по названию

Популярные бренды

LXNAV LX90xx, Руководство пользователя

Результаты поиска

Содержание LX90xx

Отзывы:

Похожие инструкции для LX90xx

Бренды по названию

Популярные бренды