LXNAV LX90xx, Руководство пользователя

Страница: 111 / 151

LX90xx system Version 4.0 February 2014
Page 111 of 151
•
STARTS will open new dialogue, where user can enter multiple start points.
•
Press LOAD to load the task from the active waypoint file.
•
Press SAVE button to store the task to the active waypoint file. This task can later be
loaded from the active waypoint file.
•
TO NANO button will be available, if Nano flight recorder is connected to the main
display unit. Press this button to send declaration to it.
•
INVERT action will invert the complete task.
•
INS PNT will insert a new point above the current cursor position.
•
DEL PNT will delete a point at the current position.
•
CLEAR will completely erase the task.
•
MOVE UP is used to move selected point upwards within the task.
•
MOVE DN is used to move selected point downwards within task.
6.7.2 Task Creation
Make sure that at least one waypoint file is loaded into the main display unit and that it is
checked and marked as an active waypoint file. Refer to Chapter 6.1.5.1 for details on how
to upload waypoint files to the system.
Select task time and press the
EDIT button. Enter the task time if required. Rotate the
PAGE selector knob to increase time in 15 minute steps and the ZOOM selector knob to
increase task time in 1 minute steps. Close the task time edit and rotate the PAGE selector
knob to select the first empty point.
Press the
EDIT button and enter a turn point name. Entering a point name is very straight-
forward. Enter the first letter of the task point name using the PAGE selector knob. The
“Helper” will show the first waypoint that matches this letter.
Press the CHAR>> button and the cursor will move to the second letter. Use the PAGE
selector knob to select the second letter. If you want to return to the first letter turn the
ZOOM selector knob anticlockwise.
Repeat this procedure until your desired point is selected. Press the
SELECT button to
complete this selection. If you do not know exact name of a point just select the first letter
and press the
SELECT button. Now scroll to the desired point using the PAGE selector
knob. Press the SELECT button once more to complete this selection.
The task edit dialogue should now look like the screen below. The letter “ S ” indicates you
entered the start point.
Move the cursor down to the next empty point and repeat the above procedure until the
entire task is entered.