LXNAV LX90xx, Руководство пользователя

Страница: 118 / 151

LX90xx system Version 4.0 February 2014
Page 118 of 151
If the task already exists in the active waypoint file the message
“Task is already saved!”
is
shown.
6.7.7 Loading a Task
It is possible to load a task from the stored tasks within the active waypoint file. Select the
LOAD action within task mode. A dialogue with a list of all stored tasks will be shown.
Total task distance, task description and task points are shown for each task stored. Select
the desired task by rotating the PAGE selector knob and press
LOAD . The task will be
loaded into the active task and the task edit dialogue will be opened.
It is also possible to delete tasks from the active waypoint file. Press the
DELETE button to
delete the selected task.
Tasks can be sorted by start point, task distance and task description. Press the
SORT
button to toggle the sort method.
6.7.8 Moving a Task Point
If at least one observation zone is defined as an assigned area, it is possible to move a point
within this area. Moving a point will increase or decrease the total task length. Select the
MOVE action within task mode. A dialogue with the current assigned area will be shown.
In the upper-right corner the remaining task distance, required task speed, remaining task
time, delta time and estimated time of arrival are shown.