LXE MX1-IS, Справочное руководство

Страница: 88 / 164

78 SOCKETS TCP/IP Stack
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
Setting SOCKETS.CFG Parameters
Set IP Address
To enable DHCP set the IP address to 0.0.0.1
IP address XXX.XXX.XXX.XXX/16
where
XXX.XXX.XXX.XXX is the IP address
16 indicates the number of bits in the network ID
Set ARP INIT
Controls whether a DHCP ARP is sent when booting up.
ARP INIT GRAT
Using this option makes the stack behave the same as before. The stack does not send a DHCP
ARP when booting up (In this mode, the ARP contains the MAC and IP addresses in the sender’s
field). This option is the default.
ARP INIT DHCP
Using this option sends a DHCP ARP on boot up (the sender’s IP address field is zero filled).
Set Interface
Interface sets the physical interfaces
Interface pdr if0 dix 1500 10 0x69
where
pdr = packet driver
if0 = interface_card
dix = frame type
1500 = MTU
10 = Buffers
0x69 = ioaddr
Set Router IP (Gateway only)
When using a gateway (IP router) to the rest of the world, replace “XXX.XXX.XXX.XXX” with
your gateway ip and remove the # at the beginning of the line.
# route add default if0 XXX.XXX.XXX.XXX
Set Domain Name Server
When using a domain name server (DNS), replace XXX.XXX.XXX.XXX with the IP address of
the DNS, and remove the # at the beginning of the line.
# domain server XXX.XXX.XXX.XXX
Display IP Address
Redisplay IP information when SOCKET.CFG runs.
IP address