LXE MX1-IS, Справочное руководство

Страница: 76 / 164

66 LXE Diagnostics
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
LXE Diagnostics
Note: Make sure there is a fully charged battery in the MX1-IS before beginning a diagnostic
process.
The MX1-IS comes equipped with several utility programs. These programs can be run to make
adjustments as indicated.
DISP35.EXE
Display Utility
Activates every pixel on the display to verify functionality.
KEY2335.EXE
Keyboard Utility
This utility performs a contact functional test of each key on the
keyboard. When activated, the key labels appear on the screen and then
each key, when initialized, clears the key label from the screen.
PARAM35.EXE
Parameter Dump Utility
This utility collects the setup configurable parameters and lists them in
a text file.
SETAPI_4.EXE
Set An API Function
Runs an API call to set a mode or change a parameter.
Display Utility (DISP35.EXE)
This command is run at the DOS prompt. There are no parameters.
Run this command file to test the screen display. It will draw a border around the display, wait for
an <Enter> keypress, and then fill the inside of the box by turning on all the pixels. There are a
total of 160 pixels across and 160 pixels down the display area – 0,0 is located at the upper left
and 159,159 is located at the lower right.
Keyboard Utility (KEY2335.EXE)
This command is run at the DOS prompt. There are no parameters.
Use this command file to display the keyboard key labels on the screen. As each key is pressed, its
label is cleared from the screen.