LXE MX1-IS, Справочное руководство

Страница: 140 / 164

130 ROM-DOS Commands
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
Examples
MODE COM1:9600,n,8,1
Modifies the settings for the COM1 device to a baud rate of 9600, no parity, eight data bits, and
one stop bit.
MODE LPT2:=COM2
Redirects the output from LPT2 to the COM2 serial port. All following output to LPT2 actually
goes to the COM2 device.
MODE mono
Indicates a monochrome display adapter.
MORE.COM
External Command
The MORE command displays a text file one screen at a time.
Syntax
MORE [filename]
or
<comman d> | MORE
Remarks
The input to MORE may come from a file, or it may be piped in from another filter or a DOS
command. If the
filename is present, then the file is viewed; otherwise MORE reads from the
Standard Input.
Once a screen has been viewed, a line is displayed on the bottom of the screen indicating the
percent of the file that has been viewed. At this point, there are several options for the next lines
of text to be viewed.
B Display the previous full page.
<enter> Display just one more line.
T Display starting at the top of the file.
Spacebar Display the next full page of text.
Q Exit MORE
Examples
DIR | MORE
Displays a directory one screen at a time.
MORE READ.ME
Displays the file READ.ME one page at a time.