LXE MX1-IS Скачать руководство пользователя

Страница: 104 / 164

Startup Problems

MX1 I-Safe Reference Guide

E-EQ-MX1ISRG-F

Missing COMMAND.COM

If the computer displays “Bad or missing Command Interpreter”, the computer is configured to
start from the hard disk and...

•

the COMMAND.COM file was accidentally deleted, or

•

the operating system can't find the COMMAND.COM file (it may be in a directory
other than the root directory), or

•

an incompatible version of COMMAND.COM was copied over the COMMAND.COM
version supplied with the MX1-IS.

Typically, to recover from this problem, the MX1-IS would be booted from an SRAM DOS boot
card. As the internal components are sealed in the MX1-IS, consult LXE Technical Support at this
time.

Setting System Time and Date

If the MX1-IS is not already powered up, turn it on.

During bootup the <F2> key must be pressed to enter BIOS Setup.

At the BIOS Setup Main Menu, move the highlight to the Time parameter.

Type the desired entry and then press the <Tab> key to move from hours to minutes to
seconds. The colons are automatically added by the system.

Press the <DownArrow> to move to the Date parameter.

Type the desired entry and then press the <Tab> key to move from month to day to
year. The backslashes are automatically added by the system.

Press <Right Arrow> until you reach the Exit menu.

Select “Save and Exit” to save the changes. Press <Enter>.

If the MX1-IS does not automatically reboot, turn the MX1-IS off and then on again.

If the MX1-IS continues to 'lose' the date and time setting, consult LXE Technical Support.

Содержание MX1-IS





































































































































































Результаты поиска

Содержание MX1-IS

Отзывы:

Похожие инструкции для MX1-IS

Бренды по названию

Популярные бренды

LXE MX1-IS, Справочное руководство

Результаты поиска

Содержание MX1-IS

Отзывы:

Похожие инструкции для MX1-IS

Бренды по названию

Популярные бренды