LXE 8650, Руководство пользователя

Страница: 19 / 308

Introduction 7
E-SW-BLUESCANPG-A Bluetooth Ring Scanner Guide
Ring Imager / Ring Scanner
The Bluetooth ring scanner can scan and decode 1D barcodes. The Bluetooth ring imager can scan
and decode 1D and 2D barcodes. The type of barcodes scanned successfully depends on the scan
type of the tethered ring device. After pairing with an LXE mobile device, it can then send the
collected barcode data to the specific Bluetooth enabled LXE mobile device for processing.
The ring devices do not have the ability to emit a good read or bad read sound. The Bluetooth
Ring Scanner module emits good read or bad read sounds based on the ring scan results. See
section titled
Status LED and Beep Indicators for an explanation of the LED and beep patterns
emitted by these devices.
Note: These ring decoding devices do not have the ability to emit a good read or bad read
sound.
Ring Imager Ring Scanner Cable Connection
Figure 1-7 Components – Ring Imager / Ring Scanner
Wrist Strap / Back of Hand Strap
Press Loops against
Hooks to secure
Figure 1-8 Wrist Strap
1 Loops
2 Elastic ring cable protector
3 Bluetooth module sleeve
4 Hooks