LVI TDE, Инструкция по установке и эксплуатации

Страница: 5 / 16

Congratulations on your new towel dryer
from LVI
Towel dryer with connection cable and mains plug, fitted
with an on/off switch.The switch has a red light which is
constantly on when the towel dryer is on. Adaptable for
fixed/concealed connection. Supplied with wall mountings
and screws.
Rated voltage 230 V.
Sealing class IP 44.
Installation
Positioning
The unit must be installed outside the area marked 1
(see Figs. 1 and 2) in accordance with the latest electrical
safety regulations, and in such a way that no control
system (e.g. button, switch etc.) can be reached by a
person using the bath or shower.
Wall-mounting and connection
The towel dryer should be mounted on a wall using the
screws included. Minimum recommended dimensions
for surrounding limit areas are shown in Fig. 3.
The wall brackets can be moved to allow for tile grouting
etc. They should be tightened from behind with the
screw in the centre of the wall bracket before the towel
dryer is mounted on the wall, see Fig. 4.
All the wall brackets on the towel dryer can be rotated,
making the dryer reversible.This enables the towel dryer
to be mounted with the switch bracket at the top or
bottom, to the left or right.
Towel dryer with connection cable but no mains plug
Remove the plug from the connection cable, and attach
the 2-wire cable using a suitable junction box as follows:
Brown wire = Live
Blue wire
= Neutral
Towel dryer with concealed connection
It is also possible to install the towel dryer with a
concealed connection.
Installation with concealed connection
• Remove the connection zone cover by loosening the
attachment screw.
• Cut the cable by the detensioner inside the cover.
• Strip the switch wires and connect them to the terminal
block included.
• Run the wall cable or equivalent through the opening.
Ensure the connection is properly sealed.
• Mount the towel dryer on the wall.
• Connect incoming wires to the terminal block (see Fig. 5)
and place it on the holder in the connection zone.
Ensure that the wires are lying as shown in Fig. 6.
Attach the cover included (without connection point)
and fasten using the screw.
Using the towel dryer
The towel dryer is switched on and off using the switch.
The red light comes on when the towel dryer is on.The
towel dryer can be left on constantly. The temperature
of the unit may vary.
Product care
If the towel dryer needs to be wiped or cleaned, use
only mild detergents.
Other information
Failure to follow these installation instructions could
result in overheating and faulty function.
LVI cannot be held liable for any damage arising from
improper installation or use.
If the connection cable is damaged it must be replaced
by one of the same type as supplied by LVI or an agent
of LVI.
The connection cable has LVI product code 642 0105.
The maximum temperature on any exposed surface of
the towel dryer is 60ºC.
Two-year product guarantee
If you have any problems or require repairs, please contact
your product supplier.
ENGLISH