Lütze 803012 Скачать руководство пользователя страница 13

Страница: 13 / 75

LION Bus Coupler

▪

System Planning

System Planning

4.1

- not applicable -

4.1.1

Standards

Danger of life, serious injuries and property damages if planning a
system with an incorrect system architecture.

▪ Check the technical data of each module.

▪ Read the operating instruction, especially the system and product

description.

▪ Check the surrounding conditions of the operating place.

▪ Check, wether the modules are designed for the operating case and the

application.

▪ Qualified employees, especially experts like engineers, should plan the

system.

The safety life cycle, as well as the safety management process, is
implemented according to

▪

EN 50126:2000-03

Railway applications - The specification and demonstration of reliability,
availability, maintainability and safety (RAMS)

▪

EN 50128:2011-06

Railway applications - Communication, signalling and processing systems -
Software for railway control and protection systems and

▪

EN 50129:2003-12

Railway applications - Communications, signalling and processing systems -
Safety related electronic systems for signalling (SIL2 relevant)

The modules are devided into two classes:

▪

Class 1 – SIL0

The software on the modules is programmed according EN 50128
SIL0 regarding error prevention and organized procedures.

▪

Class 2 – SIL2

The hardware was developed according to EN 50129 SIL2.
The software on the modules is programmed according EN 50128 SIL2
regarding error prevention and organized procedures.

This LION Bus Coupler Ethernet (SIL0) is Class 1 – SIL0.

Содержание 803012












































































Результаты поиска

Содержание 803012

Отзывы:

Бренды по названию

Популярные бренды

Lütze 803012, Руководство по эксплуатации

Результаты поиска

Содержание 803012

Отзывы:

Бренды по названию

Популярные бренды