background image

User Manual LOCC-Box-Net, LOCC-Pads 

28 

 

LOCC-Box-Net_1.61_HB_EN 

 

5  Reference 

The follow table shows an overview of all gateway user manuals. 
 

Gateway 

Article number 

User manual 

EtherCAT, USB 

716456 

EtherCAT-Gateway 716456_1.1_HB_DE 

Profinet-IO, USB 

716457 

Profinet-IO-Gateway 716457_1.00_HB_DE 

Profibus-DB, USB 

716458 

Profibus-DP-Gateway 716458_1.0_HB_DE 

CANopen, RS232, USB 

716459 

CANopen-Gateway 716459_1.0_HB_DE 

 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

Scope of the document 

 

The gateways may include software licensed by 3rd parties. The following third party intellectual 
property (IP) notices are provided to comply with the terms of such licenses. 

Lütze Gateway 716459 Firmware 

The firmware of the Gateway uses the FreeRTOSTM operating system which is developed under the 
terms of the GPL. As a special exception to the GPL, the copyright holder of FreeRTOS gives the 
permission to link FreeRTOS with independent modules that communicate with FreeRTOS solely 
through the FreeRTOS API interface, regardless of the license terms of these independent modules, 
and to copy and distribute the resulting combined work without being obliged to provide the source 
code of these proprietary modules. See the licensing section of h ttp://www.freeRTOS.org for full 
details. 

 

1)  Windows, Windows 2000, Windows XP und Windows Vista are registered trademarks of the  
 

Microsoft Corporation. 

 

2)  Program is based in part on the work of the Qwt project (http://qwt.sf.net). 

Содержание 716403





























Отзывы: