User Manual LOCC-Box, LOCC-Pads
LOCC-Box-Net_1.61_HB_EN
21
To cancel click Cancel.
To change node numbers afterwards. The modules have to be in the stopping
mode.
Scan time (cycle time)
The scan time (cycle time) can be adjusted to min.100 ms. This time indicates in which time period the
modules are queried by the Gateway. Current and voltage runs which are smaller than the scan time
are not recorded and therefore not indicated.
Start / End
This button is to start and stop the recording. After the start phase, all
fields are active and the data are indicated by selected nodes. The
status Logging is signalized in the status line.
When the Logging is finished, all windows are disconnected and are
no longer updated. Confirm with Yes to stop the logging or with No to
continue.
With Yes it is possible to confirm if the record has to be saved in
Excel Format (+.CSV), clicking No for not saving.
With Yes it is possible to save the data of the current node in Excel
Format (*.log). By clicking “No” the possibility of saving does not
exist.
Status
Show the status of the unit ON, OFF, Blown, OFF (Switch) or EXT. OFF.
Type
Show the unit type. 716410 = type 1, 716411 = type 3
SN
Indicate the serial number of the modules.
Info string
With this option it is possible to enter an information for each node. The
adjacent window can be opened by a double click on the suitable info field.
This can be written or modified only if the recording is stopped. The
information can have a length of max. 32 characters. The information is
saved in the LOCC-Box. See chapter 3.5.9.
