User Manual LOCC-Box, LOCC-Pads
LOCC-Box-Net_1.61_HB_EN
25
3.5.10 Extra / LOCC-Box Logging
After starting the window LOCC-Box Logging,
all events are saved in a temporary file on the
computer. The file can be opened via the menu
and can be saved as a CSV file. If shutting down
LOCC-Pads an inquiry for saving the file
appears. Choose Yes or No.
All events like over current, switching on/off for
nodes with date/time, status, error
current/voltage values and comments are
logged.
The start of logging is displayed by a green light
in the status line.
3.5.11 Extra / LOCC-Box Reset
Configured modules with a node number >0 can be set to the default status
(0) by resetting. Comments, settings and counters are not reset. It is useful if
using the modules with node numbers in a new order. This operation is
password protected to avoid an accidentally reset.
The password is: Reset Luetze.
Following alert window /confirmation message appears:
:
The modules have to be disconnected 5 s from the DC power supply after confirming by clicking Yes.
3.6 Configuration Saving / Open
With LOCC-Pads it is possible to save configurations and open existing ones.
Configurations are:
-
Adjustments of the status output, remote input and the behavior of the switch on procedure -
see chapter 3.5.8
-
Info strings, see chapter 3.5.1
-
Settings of the characteristic curve of position 10, please see chapter 3.5.4
-
Setting of the rotary switches for the Current Range (I) and the Characteristics (C).
-
Modules with Node number
