User Manual LOCC-Box-Net, LOCC-Pads
18
LOCC-Box-Net_1.61_HB_EN
1. Supply the module, the LOCC-
Box-Net and the Gateway with
an operating voltage of DC
12/24V.
2. Connect all the COM
connectors of the LOCC-Box-
Net module to the Gateway.
The jumper combs (see
chapter 4, Accessories) are
suitable for this purpose.
3. Connect the USB cable to the
Gateway or rather to the
computer. The computer will
recognize the Gateway as new
hardware and, if necessary, the assistant to search a new hardware will start.
3.4 Adjustments
After connecting the modules as described in
chapter 3.3, start the software by double
clicking on the LOCC-Pads symbol on the
desktop or by Start >Programs>LOCC-
Pads>LOCC-Pads.
LOCC-Pads starts in an inactive mode. With
LOCC-Pads it is possible to make adjustments
in the COM settings, to download the firmware
and to select a language.
3.4.1 Language
Click Extra > Language to choose a language (English or German).
3.4.2 COM Config
To create a communication between computer and the Gateway, it is
necessary to define the connection USB-Comport. The adjustment has to
be made by clicking Extra > COM Config.
-> The active state is indicated in the status line (COM-state) on the
right bottom of the window.
3.4.3 LOCC-Box Gateway
In order to use the Gateway for CANopen (RS232) and EtherCAT, it is necessary to make some basic
setting. Click Extra > LOCC-Box Gateway. The first line display the currently firmware from the
connected module.
