5 |
P a g e
Add a Pico 3BRL
to the selected area and provide an appropriate Device Location name. You
may need to first add the Pico 3BRL to the Toolbox.
If the Sleeve Buttons are going to communicate to the HomeWorks QS system via the RF Link,
as shown in
Section 2.1.1
, the Pico placeholder must be link assigned to the appropriate RF
link. Go to
Design > Link Assignment
to associate the Pico.
If the Sleeve Buttons are going to communicate to the HomeWorks QS system via the QS Link
(through a QSM), as shown in
Section 2.1.2
, the Pico placeholder must be assigned to the
appropriate QSM device. Find the QSM and assign the Pico by going to
Design > Equipment
.
