4 |
P a g e
2.1.2 Wired (QS) Link Connection
In this configuration, the LaunchPort Sleeve Buttons communicate to the HomeWorks QS
processor by sending wireless data to a QS Sensor Module (QSM) which then passes the
communication back to the Processor over the QS Wired Link. The QSM takes up (1) of the
available (99) addresses on the QS Link. Up to (10) can be addressed to a single QSM.
HQP6-2
HWQS Processor
QSM2-XW
QS Sensor Module
QS Wired Link
LaunchPort Sleeve
Buttons w/ iPad &
Home app
2.2 Adding LaunchPort Sleeve Buttons to a HomeWorks QS Database
In order to program the LaunchPort Sleeve Buttons via the HomeWorks QS programming
software, a Pico Wireless Controller must be added, serving as the programming template for
the sleeve. To start, go to
Design > Controls
.
Select the desired room
in which the LaunchPort Sleeve Buttons will be installed by clicking
on the room name within the area tree.
