12 |
P a g e
Use the Selected Device Location drop-down menu and locate the room where the Pico 3BRL
has been placed. Click on the device name of the Pico 3BRL.
On the left-side of the screen will be a larger image of the Pico 3BRL. Click on the button that
you would like to program. The currently selected button will be shaded blue.
To the right will be a drop down menu to select a room. This drop down menu is used to locate
the zones that you would like the Pico button to control. In order to allow the programming of
lights and shades to the same Pico Wireless Control, uncheck the box for “Only show devices
that match engraving.”
Note:
When controlling Lutron equipment, the Raise and Lower buttons of a Pico controller, in
RadioRA 2, can only be used for the Raise and Lower functions. Only devices that support
raising and lowering (dimming zones and shades) can be controlled by these buttons.
