Lundix It SPC Bridge KNX, Руководство пользователя

Страница: 5 / 25

© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION
AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION OF LUNDIX IT.
SPC Bridge KNX User Manual
Revision 1.0
Page 5 of 25
Reference 2020-111
1 Introduction
1.1 SPC Bridge KNX
SPC Bridge Weinzierl KNX interface 332 Weinzierl KNX interface 312
SPC Bridge KNX allows interfacing Vanderbilt SPC intrusion system to a KNX system. Using the SPC
Bridge you are able to use events from all your SPC connected motion detectors, door/window
contacts, fire detectors and alarm status for automations in your KNX system. SPC Bridge KNX
includes a certified Weinzierl KNX interface (332 or 312) for a reliable and approved connection to
the KNX bus.
1.2 Main Features

Mirrors SPC zone and area states/status to KNX bus

Support for area and zone commands from KNX bus, e.g arm/disarm, inhibit zone.

SPC Panel Communication using FlexC

Weinzierl KNX interface 332 or 312

Communication objects configurable in KNX ETS.

Web based Admin GUI

Recommended for maximum 128 zones and 16 areas (The actual limit depends on the use case,
e.g. how many motion detectors the SPC system has.)
1.3 Hardware Specification
SPC Bridge
Processor 400MHz, 24K MIPS
Flash 16MB
RAM 64MB
Power input 9 – 12V DC
Network 2 x 10M/100M RJ45 Connectors
WiFi 802.11 b/g/n
USB 1 x USB 2.0 host connector
Type Approval FCC Part15 Subpart B, Subpart C, CE NB, C-Tick
Weinzierl KNX interface 332
Mechanical Housing: plastic transparent, Dimensions: 58 mm x 12 mm x 18 mm